  CROWN XLS-2500 Drive Core Series Power Amplifier
CROWN XLS2500 Drive Core Series Power Amplifier
Features:
Power Amp with Integrated DriveCore Technology,
Advanced Switched-Mode Power Supply,
PureBand Crossover System,
XLS High Performance, Lightweight Class D amp weighs less than 11 lbs.
Integrated PureBand Crossover System for better performance and control,
Peakx Limiters provide maximum output while protecting your speakers,
XLR, 1/4", RCA inputs provide outstanding flexibility,
1/4" Inputs can be used as loop-thrus to distribute signal to additional amplifiers,
Efficient forced-air fans prevent excessive thermal buildup,
Electronically balanced XLR inputs; touchproof binding post and Speakon outputs,
Precision detented level controls, power switch, power LED,
six LEDs indicate signal, clip and fault for each channel.
Specifications:
Minimum Guaranteed Power per channel, both channels driven: 1550W, Stereo, 2 Ohms (per ch.); 775W, Stereo, 4 Ohms (per ch.); 440W, Stereo, 8 Ohms (per ch.); 1500W, Bridge-Mono, 8 Ohms; 2400W, Bridge-Mono, 4 Ohms;
Sensitivity (for full rated power at 4 Ohms): 1.4 Vrms,
Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, -1 dB,
Signal-to-Noise Ratio Rated as dBr to full rated 8Ohm power output (A-Weighted): XLS2500 > 103dB,
Damping Factor (8 Ohm): 10Hz to 400Hz: > 200,
Crosstalk (below rated 8Ohm power): At 1kHz: > 85dB; At 20kHz: >55dB,
Input Impedance (nominal): 20 kOhm balanced, 10 kOhm unbalanced,
Load Impedance: 2 to 8 Ohm per channel in Stereo; 4 to 8 Ohm in Bridge Mono.
AC Line Voltage and Frequency Configurations Available (± 10%):120 VAC 60 Hz; 100 VAC 50/60 Hz; 220 and 240 VAC 50 Hz.
Ventilation: Flow-through ventilation from front to back,
Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation.
Air Volume Requirements (per minute per unit): 80.15 ft (2.27 m ),
Integrated Processing: PureBand Crossover System; Crossover Filter: Linkwitz-Riley 24dB per Octave; Crossover Frequency Range: 50 HZ - 3 kHz: Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF); Peakx limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers,
Dimensions: 19"W x 3-1/2"H x 10-3/4"D,
Weight: XLS2500: 10-3/4 lb.
Up I Next
|
