  MACKIE PPM1012
Ultra-light and rack-mountable, the Mackie PPM1012 professional powered desktop mixer features two ridiculously robust power amps for mains and/or monitors (800W + 800W). With 1600 watts of system power, this mixer provides all the raw power that you need. Things can get pretty intense out there, and your gear needs to be able keep up the pace. We custom designed the PPM1012 with Class-D amps, which are cool-running and boast maximum efficiency, keeping your sound pumping until they start kicking people out. We had to include Mackie’s proven Fast Recovery circuitry, eliminating the risk of pesky amp latching. The result is a distortion free mix even when pushing peak levels. The built-in limiter can go toe-to-toe with the most popular outboard stereo limiters used in live sound today, protecting your speakers from damage. The limiter’s attack and release times are specifically selected to address full-bandwidth music and will not muddy things up by adding any unwanted pumping. PPM mixers are surprisingly lightweight, but tremendously powerful. You can push the PPM1012 to its maximum output, distortion free!
Features:
Full-featured 12-Channel, 1600W Powered Desktop Mixer with 4-segment LEDs and solo PFL on every channel,
800W + 800W Mackie designed Class-D, Fast Recovery™ power amplifiers,
32-bit dual RMFX+™ processor featuring 24 “Gig Ready”, useable reverbs, choruses, and tap delay for live applications,
8 mic/line mono inputs and 2 stereo line inputs for flexible connectivity
Mackie high-headroom, low-noise mic preamps with RF rejection for pristine signal,
New Dedicated In-line Compression provides increased presence and punch for vocals and instruments,
Mackie’s 3-Band Active channel EQ with a Mid sweep (100Hz-8kHz) on mono channels & 4-band active EQ on stereo line channels 7 & 8,
2 built-in DI boxes for direct instrument connections on channels 7 & 8
4 Aux sends—2 FX & 2 Mon,
Dual 9-Band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes,
Mono output with level control & low pass filter selectable from 75Hz-100Hz,
3-Mode Amplifier for ultra-flexible routing, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 & Mon 2,
Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers,
48v Phantom power available for all mic inputs,
Headphone output with level control,
12v BNC lamp Jack,
Built-like-a-tank metal chassis with a handle built into the front of the mixer for easy transport,
Rack ears included,
Lightweight and portable (29lbs/ 13kg).
Up I Next
|
