JBL AW266-LS-BK 12" 2-Way All Weather Loudspeaker with EN54-24 Certification, black.
High Power 2-Way All Weather Loudspeaker with 1 x 12" LF for Life Safety Applications The AW266-LS is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2262H 300 mm (12 in) low-frequency driver and 2432H high-frequency 38 mm (1.5 in) exit, 75 mm (3 in) voice-coil compression driver. The large format Progressive Transition wave-guide provides excellent 60° x 60° coverage. The loudspeaker system can used in either the vertical or horizontal orientation.
Weather-Resistant, All Fiberglass Enclosure
60° x 60° Coverage
2262H Differential Drive® Low- Frequency Driver
2432H High Frequency Compression Driver
Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion
Available in Gray and Black finish
400 W, 70/100V Transformer Included
U-type Mounting Bracket Included
Frequency Range (-10 dB) 54 Hz – 20 kHz
Frequency Response (±3 dB): 102 Hz – 18 kHz
Coverage Pattern 60° x 60° waveguide
Horizontal: Vertical: 500 Hz-1000 Hz -2000 Hz -4000 Hz-141°-54°- 75-59° - 93° - 63°-51° - 35°
Directivity Factor (Q) 15.8
Directivity Index (DI) 12 dB
Crossover Frequency 1.1 kHz
Long-Term System Power Rating (IEC) 400 W (1600 W peak) 100 hrs
Maximum SPL 125 dB SPL (131 dB peak)
Maximum SPL (@ 4m) 112.45 dB
System Sensitivity (1W @ 1m) 98 dB SPL
Sensitivity (1W @ 4m) 87.16 dB SPL
70V / 100V Transformer Taps 70V: 400 W, 200 W, 100W 100V: 400W, 200W
Low Frequency Driver 1 x JBL 2262H 300 mm (12 in) Differential Drive® driver with 75 mm (3 in) dual voice coil
Nominal Impedance 8 ohms
Sensitivity (1W @ 1m, within operational band) 96 dB SPL
High Frequency Driver JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Nominal Impedance 8 ohms
Sensitivity (1W @ 1m) 113 dB SPL
Enclosure Hand-Laminated Fiberglass, gray gelcoat (similar to Pantone 420C), available in black (-BK)
Suspension Attachment 2 x M10 for Included U-Bracket, 2 x M6 for aiming stabilization, 1 x M10 on rear for safety.
Grille Three layer grille assemblies consisting of 16-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh.
Input Connector CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs.
Environmental Specifications IP55C per IEC 529
Dimensions (H x W x D in 409 x 732 x 452 mm horizontal cabinet orientation) (16.1 x 28.8 x 17.8 in)
Net Weight 25.2 kg (55.5 lb)