JBL AW526-LS 15" 2-Way All Weather Loudspeaker with EN54-24 Certification.
High Power 2-Way All Weather Loudspeaker with 1 x 15" LF for Life Safety Applications The AW526-LS is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2265H 380 mm (15 in) low-frequency driver and 2432H high-frequency 38 mm (1.5 in) exit, 75 mm (3 in) voice-coil compression driver. The large format Progressive Transition wave-guide provides excellent 120° x 60° coverage. The waveguide is rotatable so the loudspeaker system can used in either the vertical or horizontal orientation. The system is equipped with a 400 W 70/100V transformer.
Weather-Resistant, All Fiberglass Enclosure
120° x 60° Coverage
2265H Differential Drive® Low-Frequency Driver
2432H High Frequency Compression Driver
Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion
Rotatable waveguide for vertical or horizontal orientation
Available in Gray and Black finish
400 W, 70/100V Transformer Included
U-type Mounting Bracket Included
Frequency Range (-10 dB) 39 Hz – 20 kHz
Frequency Response (±3 dB): 86 Hz – 17 kHz
Coverage Pattern 120° x 60°, rotatable waveguide
Coverage Angle 500 Hz 1000 Hz 2000 Hz 4000 Hz
Horizontal 128° 98° 115° 108°
Vertical 108° 95° 67° 46°
Directivity Factor (Q) 7.9
Directivity Index (DI) 9 dB
Crossover Frequency 1.1 kHz
Long-Term System Power Rating (IEC) 400 W (1600 W peak), 100 hrs
Maximum SPL 127 dB-SPL cont avg (133 dB peak)
Maximum SPL (@ 4m) 112.11 dB
System Sensitivity (1W @ 1m) 100 dB
Sensitivity (1W @ 4m) 86.98 dB SPL
70V / 100V Transformer Taps 70V: 400 W, 200 W, 100W 100V: 400W, 200W
Low Frequency Driver 1 x JBL 2265H 380 mm (15 in.) Differential Drive® driver with 75 mm (3 in) dual voice coil
Nominal Impedance 8 ohms
Sensitivity (1W @ 1m, within operational band) 98 dB SPL
High Frequency Driver JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Nominal Impedance 8 ohms
Sensitivity (1W @ 1m) 113 dB SPL
Waveguide PT-H126HF -1
Enclosure Hand-Laminated Fiberglass, gray gelcoat (similar to Pantone 420C), available in black (-BK)
Suspension Attachment 2 x M10 for Included U-Bracket, 2 x M6 for aiming stabilization, 1 x M10 on rear for safety.
Grille Three layer grille assemblies consisting of 16-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh.
Input Connector CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs.
Environmental Specifications IP55C per IEC 529
Dimensions (H x W x D in horizontal cabinet orientation) 485 x 810 x 478 mm (19.1 x 31.9 x 18.8 in)
Net Weight 28.3 kg (62.5 lb)