The dual door frame is made to fit most Lowell racks (23 in.). Use the frame to mount a single short door in order to secure some of the mounted equipment. Alternately, you can mount two short doors to the same rack and change the key lock on one of them to control access to equipment.
FEATURES
Frame mounts without using panel mounting space.
Included security bracket mounts to top of lower door projecting into rack within 1/4 inch of mounting rails thus securing contents of the lower section when the top door is open.
Security bracket is factory-installed when the LDDF frame is ordered with the rack, but it can also be field-installed with two screws
Equipment with protruding knobs may need to be re-positioned to accommodate the security bracket.
Order door(s) separately
COMPLIANCE & CERTIFICATION
Made in the U.S.A.
Certified U.S. steel
A&E SPECIFICATIONS
The rack shall be equipped with dual-door frame model __________ (#LDDF-21, #LDDF-24, #LDDF-35, #LDDF-40, #LDDF-44), which will accept 1 or 2 short surface-mount front doors to separate and/or secure access to mounted equipment. The surface-mount steel frame shall extend 1" from the rack. It shall attach to factory-installed threaded inserts on the rack, without drilling. Inserts shall be located on right and left to accommodate mounting on either side. The dual-door frame shall be steel with black powder epoxy paint. The doors and an alternate key lock, if needed, shall be ordered separately.
