19 inch equipment rack -- an elegant design for the high-end decor of boardrooms and home theaters, this ready-to-use rack includes leg levelers, lockable side panels, a rear access cover, and a tempered glass front door. Charcoal Grey textured finish.
SPECIFICATIONS
Rack Space: 18U
Height: 35.67 in.
Width: 22.31 in.
Depth: 24.00 in.
FEATURES
Solid top with vents and cable entry port
Base with open center and cable entry ports
Removable side access covers with key locks (opens from top)
Rear access cover with key lock (opens from top)
Smoked grey tempered glass front door with key lock
Two-pair fully adjustable rails tapped 10-32 with printed RU scale
Grounding stud
Leg levelers
Beveled corners
Charcoal Grey textured powder epoxy finish
Pilot Point screws with captive washers
Load capacity 500 lbs.
COMPLIANCE & CERTIFICATION
EIA/TIA compliant
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.
A&E SPECIFICATIONS
The EIA/TIA compliant 19" equipment rack shall be Lowell Model No. LDR-1824 which shall measure 22.31"W x 24.00"D x 35.67"H with 18U panel space. Construction shall be fully welded 16-gauge steel with top/base reinforced at loadbearing junctions and finished with a charcoal grey textured coating. Load capacity shall be 500 lbs. The rack shall include a smoked grey tempered glass front door with key lock, recessed rear access cover with key lock, removable side panels with key locks (keyed the same as the rear access cover), two pairs of 11-gauge steel rails with mounting holes tapped 10-32 and rack unit increments printed on EIA spacing, and a steel top with vents and hole with grommet. The base shall feature a center opening, two holes with grommets, a grounding stud, and four leg levelers.
