Home > Search By Brands > Lowell > Lowell LER-3527-LRD

Lowell LER-3527-LRD

Product Description


LER-3527-LRD: Enclosed Rack 35U x 27?D


35U x 27"D stand-alone floor rack with adjustable rails is fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions.

SPECIFICATIONS Rack Space: 35U Height: 67.375 in. Width: 23.06 in. Depth: 27.00 in. (24.34 usable) RACK FEATURES Configurable top with 7U opening for 19 in. panels (solid closure panels included) Welded sides with vents Open front (optional door) Open back (optional door) One-pair fully adjustable rails tapped 10-32 (printed RU scale) Cable Management: Multiple lacing points, knockout panels Pilot Point screws with captive washers Grounding stud Threaded inserts (for optional leg levelers) Beveled corners Black wrinkle powder epoxy finish Load capacity 3150 lbs. COMPLIANCE & CERTIFICATION EIA/TIA compliant UL 2416 Listed RoHS compliant Certified U.S. steel Made in Missouri, U.S.A. Revit Models: LER Series A&E SPECIFICATIONS The EIA/TIA/RoHS compliant, stand-alone floor rack shall be Lowell Model No. LER-3527-LRD. Overall measurements shall be 67.375"H x 27"D x 23.06"W with panel space of 35 rack units. Load capacity shall be 3150 lbs. The rack shall include welded side panels with vents, top with 7U opening and combination knockouts, open base with grounding stud, one pair adjustable front mounting rails with printed RU increments, combination knockouts above and below rear opening, and provisions to mount an optional surface-mount front door or rear rails (ordered separately). The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black wrinkle powder epoxy finish. It shall be UL Listed to UL2416.

35U x 27"D stand-alone floor rack with adjustable rails is fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions.

SPECIFICATIONS

Rack Space: 35U
Height: 67.375 in.
Width: 23.06 in.
Depth: 27.00 in. (24.34 usable)

RACK FEATURES

Configurable top with 7U opening for 19 in. panels (solid closure panels included)
Welded sides with vents
Open front (optional door)
Open back (optional door)
One-pair fully adjustable rails tapped 10-32 (printed RU scale)
Cable Management: Multiple lacing points, knockout panels
Pilot Point screws with captive washers
Grounding stud
Threaded inserts (for optional leg levelers)
Beveled corners
Black wrinkle powder epoxy finish
Load capacity 3150 lbs.

COMPLIANCE & CERTIFICATION

EIA/TIA compliant
UL 2416 Listed
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.

Revit Models: LER Series

A&E SPECIFICATIONS

The EIA/TIA/RoHS compliant, stand-alone floor rack shall be Lowell Model No. LER-3527-LRD. Overall measurements shall be 67.375"H x 27"D x 23.06"W with panel space of 35 rack units. Load capacity shall be 3150 lbs. The rack shall include welded side panels with vents, top with 7U opening and combination knockouts, open base with grounding stud, one pair adjustable front mounting rails with printed RU increments, combination knockouts above and below rear opening, and provisions to mount an optional surface-mount front door or rear rails (ordered separately). The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black wrinkle powder epoxy finish. It shall be UL Listed to UL2416.