35U x 22"D 19-inch equipment rack with fixed-position front rails features welded sides and short rear brackets for semi-adjustable placement of accessories in the rear. Fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions.
SPECIFICATIONS
Rack Space: 35U
Height: 67.375 in.
Width: 23.06 in.
Depth: 22.00 in. (19.25 usable)
FEATURES
Solid top with vents
Welded sides with vents
Open front (optional door)
Recessed rear door with vents and key lock
One-pair fixed-position front rails tapped 10-32 with printed RU scale
Cable Management: Combination knockouts
Pilot Point screws with captive washers
Grounding stud
Threaded inserts (for optional leg levelers)
Beveled corners
Black wrinkle powder epoxy finish
Load capacity 1600 lbs.
COMPLIANCE & CERTIFICATION
EIA/TIA compliant
UL 2416 Listed
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.
A&E SPECIFICATIONS
The stand alone floor rack shall be Lowell Model No. LFR-3522. Overall measurements shall be 67.375"H x 22"D x 23.06"W with panel space of 35 rack units. Load capacity shall be 1600 lbs. The rack shall include a recessed rear door with vents and key lock, welded side panels with vents, closed top with vents, open base with grounding stud, one pair fixed-position front mounting rails with printed RU increments, combination knockouts above and below rear door, and provisions to mount optional rear rails or optional surface-mount front door. The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black wrinkle powder epoxy finish.
