35U x 27"D 19-inch equipment rack with fixed-position front rails features welded sides and short rear brackets for semi-adjustable placement of accessories in the rear. Fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions.
SPECIFICATIONS
Rack Space: 35U
Height: 67.375 in.
Width: 23.06 in.
Depth: 27.00 in. (24.25 usable)
FEATURES
Configurable top with 7U opening for 19 in. panels (solid closure panels included)
Welded sides with vents
Open front (optional door)
Recessed rear door with vents and key lock
One-pair fixed-position front rails tapped 10-32 (printed RU scale)
Cable Management: Combination knockouts
Pilot Point screws with captive washers
Grounding stud
Threaded inserts (for optional leg levelers)
Beveled corners
Black wrinkle powder epoxy finish
Load capacity 1600 lbs.
COMPLIANCE & CERTIFICATION
EIA/TIA compliant
UL 2416 Listed
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.
A&E SPECIFICATIONS
The stand alone floor rack shall be Lowell Model No. LFR-3527. Overall measurements shall be 67.375"H x 27"D x 23.06"W with panel space of 35 rack units. Load capacity shall be 1600 lbs. The rack shall include a recessed rear door with vents and key lock, welded side panels with vents, 7U top opening that can be closed with the included shipping stiffener panels, open base with grounding stud, one pair fixed-position front mounting rails with printed RU increments, combination knockouts above and below rear door, and provisions to mount optional rear rails or optional surface-mount front door. The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black wrinkle powder epoxy finish.
