LGNR-4432-BAV: Narrow Gangable Rack with accessories

Narrow (22 in. W) gangable rack with adjustable rails is fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions. This model includes an accessory bundle (not installed).

SPECIFICATIONS (for LGNR-4432 rack)

• Rack Space:  44U

• Rack Height:  83.13 in.

• Rack Width:  22.00 in.

• Rack Depth:  32.00 in.

• Useable Depth:  29.34 in.

ACCESSORY BUNDLE

• Front door with key lock

• Side panels with integral handles

• 7U panel with a 10 in. turbo fan

• Thermostat to control fan activation

• Four horizontal-mount slotted cable bars (straight)

• Two horizontal-mount slotted cable bars (offset)

• Vertical cable management bar

• Velcro cable wraps

• Power strip with 16 (15A) and 8 (20A) outlets, surge suppression, and 12-ft. attached cord with NEMA 5-20P plug.

• Heavy-duty leg levelers

• Extra rack screws

A&E SPECIFICATIONS

The EIA/TIA compliant, UL Listed (UL2416) 19” gangable equipment rack shall be Lowell Model No. LGNR-4432-BAV, which shall measure 22”W x 32”D x 83.13”H (44U). The rack shall be UL Listed in the U.S. and Canada with a load capacity of 3150 lbs. Construction shall be fully welded 16-gauge steel frame with 14-gauge steel top and 14-gauge steel bottom reinforced at loadbearing junctions and finished with a durable black powder epoxy coating. The rack shall feature a solid steel rear door with key lock, two pairs of 11-gauge steel adjustable rails with mounting holes tapped 10-32 and rack unit increments printed on EIA spacing, a rear frame with removable knockout panels, combination knockouts (1/2”, 3/4”, 1”, 1-1/2”) for conduit wiring, BNC knockouts for UHF/VHF antenna, grounding stud, and integral top rails with mounting holes tapped 10-32.

Rack shall ship with a bundle of accessories (not installed) including a solid steel front door, one pair side panels, a 10” turbo fan in 7U rackmount panel, thermostat, 20A power strip with 24 outlets, six horizontal and one vertical cable managers, bag of velcro cable wraps, four leg levelers and two extra bags of Pilot Point screws.