Home > Search By Brands > Lowell > Lowell LH-30TA

Lowell LH-30TA

Product Description


LH-30TA: Re-entrant Horn (30W)


30W paging horn -- double re-entrant metal horn with high efficiency 30W compression driver for clear voice paging and tone signaling in indoor or outdoor applications is ideal for use where a weather-resistant speaker is specified for public address/signaling applications that require high intelligibility (e.g. schools, recreational facilities, warehouses, distribution centers, parking facilities and commercial buildings).

PERFORMANCE Clear, loud paging and tone signaling (indoor/outdoor) ASSEMBLY INCLUDES Driver: 30W compression Transformer: For 25V, 70V or 100V systems. Screwdriver-adjustable tap selector and screw terminal connections in rear. Integral strain relief and plastic cover. Enclosure: Weather-resistant assembly suitable for indoor/outdoor use is all-metal construction with a durable beige epoxy finish. Two-wire hook-up to rear access screw terminals. 10.37 in. diameter x 10.63 in. deep. Mounting Aids: Universal swivel mounting bracket Operating Temperature Range: -40 to 158 degrees F Average Sensitivity (1W/1M): 118.1dB Ships ready for installation COMPLIANCE & CERTIFICATION IP66 rated (IEC 60529) for water/dust-resistance when optional wiring compartment covers are used (see options below). A&E SPECIFICATIONS The horn shall be Lowell Model LH-30TA, which shall be a double reentrant design with a high efficiency 30W compression driver, round bell and universal swivel-style base. Power rating shall be 30 watts continuous. Frequency response shall be 411Hz-4.0kHz (ą6dB) with a sensitivity of 118.1 log average (1W/1M) 132.9dB maximum SPL (calculated based on power rating and measured sensitivity). Dispersion shall be 40 degrees conical (2kHz Octave Band). Impedance shall be 2500, 1300, 670, 330, 169, 90, 45 ohms. Horn shall include a 25/70/100V transformer with screwdriver selectable taps. Taps for 25V use shall be .25, .48, .93, 1.9, 3.7, 6.9 and 13.9 W. Taps for 70V use shall be 2, 3.8, 7.5, 15, and 30W. Taps for 100V use shall be 4, 7.7, 15, and 30W. Transformer connections shall be protected by a plastic cover with strain relief. The horn assembly shall measure 10.37 in. diameter x 10.63 in. deep and shall be weather-resistant metal construction with all metal parts painted in corrosion-resistant beige epoxy.

30W paging horn -- double re-entrant metal horn with high efficiency 30W compression driver for clear voice paging and tone signaling in indoor or outdoor applications is ideal for use where a weather-resistant speaker is specified for public address/signaling applications that require high intelligibility (e.g. schools, recreational facilities, warehouses, distribution centers, parking facilities and commercial buildings).

PERFORMANCE

Clear, loud paging and tone signaling (indoor/outdoor)

ASSEMBLY INCLUDES

Driver: 30W compression
Transformer: For 25V, 70V or 100V systems. Screwdriver-adjustable tap selector and screw terminal connections in rear. Integral strain relief and plastic cover.
Enclosure: Weather-resistant assembly suitable for indoor/outdoor use is all-metal construction with a durable beige epoxy finish. Two-wire hook-up to rear access screw terminals. 10.37 in. diameter x 10.63 in. deep.
Mounting Aids: Universal swivel mounting bracket
Operating Temperature Range: -40 to 158 degrees F
Average Sensitivity (1W/1M): 118.1dB
Ships ready for installation

COMPLIANCE & CERTIFICATION

IP66 rated (IEC 60529) for water/dust-resistance when optional wiring compartment covers are used (see options below).

A&E SPECIFICATIONS

The horn shall be Lowell Model LH-30TA, which shall be a double reentrant design with a high efficiency 30W compression driver, round bell and universal swivel-style base. Power rating shall be 30 watts continuous. Frequency response shall be 411Hz-4.0kHz (ą6dB) with a sensitivity of 118.1 log average (1W/1M) 132.9dB maximum SPL (calculated based on power rating and measured sensitivity). Dispersion shall be 40 degrees conical (2kHz Octave Band). Impedance shall be 2500, 1300, 670, 330, 169, 90, 45 ohms. Horn shall include a 25/70/100V transformer with screwdriver selectable taps. Taps for 25V use shall be .25, .48, .93, 1.9, 3.7, 6.9 and 13.9 W. Taps for 70V use shall be 2, 3.8, 7.5, 15, and 30W. Taps for 100V use shall be 4, 7.7, 15, and 30W. Transformer connections shall be protected by a plastic cover with strain relief. The horn assembly shall measure 10.37 in. diameter x 10.63 in. deep and shall be weather-resistant metal construction with all metal parts painted in corrosion-resistant beige epoxy.