12U x 26"D roll-out studio rack is deal for use as an under desk rack. The 15-degree sloped front allows easy viewing of electronics from a seated position while the swivel casters provide convenient roll-out access to controls.
SPECIFICATIONS
Rack Space: 12U (angled)
Height: 26.88 in. (with casters)
Width: 23.00 in.
Depth: 25.52 in.
FEATURES
18-gauge steel construction reinforced at all load-bearing junctions
Welded sides and top
12U mounting space on 15-degree angle
Hideaway front door with key lock opens from top and slides into base
Rear access cover with key lock and cable ports
Decorator style cutouts on front for mounting (optional) switches
One pair fixed-position mounting rails
Rear mounting holes on EIA spacing with 10-32 Tinnerman clips
Black wrinkle powder epoxy finish
Load capacity 250 lbs.
COMPLIANCE & CERTIFICATION
EIA/TIA compliant
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.
A&E SPECIFICATIONS
The EIA/TIA compliant rack shall be Lowell Model No. LPSR-1226, which shall measure 25.98 in. high (without casters) x 23 in. wide x 25.52 in. deep at the base. It shall be fully welded 18-gauge steel construction reinforced at all load-bearing junctures. It shall provide 12U mounting space on a 15-degree slope with each level providing a different depth for equipment. It shall have a load capacity of 250 lbs.. The rack shall include integral side handles, swivel casters, hideaway front door with keyed lock, rear access cover with keyed lock and cable entry ports, two front decorator style cutouts with cover plates for external access to mounted switches (not included), one-pair of fixed position front mounting rails tapped 10-32, and rear mounting holes with 10-32 Tinnerman clips. Vents for natural heat dissipation shall be provided on sides and front door. Finish shall be black wrinkle powder epoxy.
