Economical two-part rack features a 16-gauge steel backbox and a front mounting section that attaches with heavy-duty bolts through steel fasteners with securing nuts.
SPECIFICATIONS
Rack Space: 7U
Height: 20.08 in.
Width: 23.06 in.
Depth: 21.92 in.
FEATURES
Backbox has two center locks, 16 in. mounting centers, 10 in. wide center wiring path, and removable knockout panels on top/bottom
Mounting section connects to backbox with right or left-hand swing and features welded sides with top/bottom vents
One pair fixed position front rails tapped 10-32
Pilot Point screws with captive washers
Beveled corners
Black wrinkle powder epoxy finish
Load capacity 150 lbs.
COMPLIANCE & CERTIFICATION
EIA/TIA compliant
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.
A&E SPECIFICATIONS
The wall-mount rack shall be Lowell Model No. LWSR-722 which shall feature a backbox and mounting section. Overall measurements shall be 20.08"H x 21.92"D x 23.06"W with 7 rack units of panel space. The mounting section shall have top/bottom side vents and one pair of fixed-position front mounting rails tapped 10-32 and marked with rack unit increments. It shall attach to the backbox with heavy duty bolts that can be moved to the opposite side to change swing orientation. The backbox shall measure 3.65"D and be formed from 16-gauge certified U.S. steel with keyhole mounting slots on 16" centers. It shall feature a 10"W center wiring path, removable knockout panels on top/bottom, lacing points on back plane, and keyed locks at top and bottom. Knockout panels shall have 1/2" knockouts for wireless antennas; 3/4-1/2" and 1-1/2"-1" compound knockouts for conduit. The rack shall have a black wrinkle powder epoxy finish.
