Home > Search By Brands > Lowell > Lowell RCC-2236

Lowell RCC-2236

Product Description


RCC-2236: Remote Consolidation Cabinet 2U+2U x 36?H


Low profile wall-mount cabinet secures 19” E.I.A. network equipment with minimal intrusion into the room. The cabinet maximizes internal space by providing two mounting bays with separate rail sets. The 2U top bay allows pivot-down access for a horizontally-mounted panel such as a shallow patch panel (not included). The 2U bottom bay features rails to vertically-mount hubs, servers, or similar active equipment.

SPECIFICATIONS Rack Space: 2U horizontal plus 2U vertical Measurements: 25.5”W x 36”H (30.2”D usable) x 5”D FEATURES 16-gauge steel construction with rear cutouts to fit over wall obstructions and aid cable management. 11-gauge rails in the 2U top section will accommodate a shallow patch panel. Rails pivot down for access. 11-gauge rails in the 2U bottom section will vertically-mount 19” equipment. Dual-punch rails: All rails have holes tapped 10-32 (for use with included screws) plus square openings for alternate hardware (12-24 or 6mm screws, not included). Vented front door with beveled edges and inset handle Knockouts in top and base Multiple bridge lances Vents in base accommodate (optional) single fan kits Includes E.O. box in base Side key lock Network Grey powder epoxy finish Load Capacity: 150 lbs. COMPLIANCE & CERTIFICATION EIA/TIA compliant Certified U.S. steel Made in Missouri, U.S.A. A&E SPECIFICATIONS The wall-mount cabinet shall be Lowell Model No. RCC-2236, which shall feature two mounting areas. Overall measurements shall be 25.5 x 36 x 5 inches. The 2U top section shall have 11-gauge rails that allow pivot-down access for a horizontally-mounted shallow panel (not included). The 2U bottom section shall have 11-gauge adjustable rails to vertically-mount 19” equipment up to 30.2 inches deep. The cabinet shall feature knockouts and bridge lances for cable management. The shallow front door shall have vents, beveled edges and an inset handle. The door shall be field-reversible for left or right-hand swing. The cabinet shall be made in the U.S.A. with certified U.S. steel finished in Network Grey powder epoxy paint. It shall include an E.O. box in the base and a side lock.

Low profile wall-mount cabinet secures 19” E.I.A. network equipment with minimal intrusion into the room. The cabinet maximizes internal space by providing two mounting bays with separate rail sets. The 2U top bay allows pivot-down access for a horizontally-mounted panel such as a shallow patch panel (not included). The 2U bottom bay features rails to vertically-mount hubs, servers, or similar active equipment.

SPECIFICATIONS

Rack Space: 2U horizontal plus 2U vertical
Measurements: 25.5”W x 36”H (30.2”D usable) x 5”D

FEATURES

16-gauge steel construction with rear cutouts to fit over wall obstructions and aid cable management.
11-gauge rails in the 2U top section will accommodate a shallow patch panel. Rails pivot down for access.
11-gauge rails in the 2U bottom section will vertically-mount 19” equipment.
Dual-punch rails: All rails have holes tapped 10-32 (for use with included screws) plus square openings for alternate hardware (12-24 or 6mm screws, not included).
Vented front door with beveled edges and inset handle
Knockouts in top and base
Multiple bridge lances
Vents in base accommodate (optional) single fan kits
Includes E.O. box in base
Side key lock
Network Grey powder epoxy finish
Load Capacity: 150 lbs.

COMPLIANCE & CERTIFICATION

EIA/TIA compliant
Certified U.S. steel
Made in Missouri, U.S.A.

A&E SPECIFICATIONS

The wall-mount cabinet shall be Lowell Model No. RCC-2236, which shall feature two mounting areas. Overall measurements shall be 25.5 x 36 x 5 inches. The 2U top section shall have 11-gauge rails that allow pivot-down access for a horizontally-mounted shallow panel (not included). The 2U bottom section shall have 11-gauge adjustable rails to vertically-mount 19” equipment up to 30.2 inches deep. The cabinet shall feature knockouts and bridge lances for cable management. The shallow front door shall have vents, beveled edges and an inset handle. The door shall be field-reversible for left or right-hand swing. The cabinet shall be made in the U.S.A. with certified U.S. steel finished in Network Grey powder epoxy paint. It shall include an E.O. box in the base and a side lock.