8-step power sequencer works with low voltage remote power controls and switches to provide time-delayed activation and deactivation of AC powered equipment on site or in a remote location.
FEATURES
Eight delayed closure circuits activate in sequential order and deactivate in reverse order. Sequencing is initiated by a single remotely located SPST maintained contact closure switch or multiple SPST normally open momentary closure switches (order separately).
Chassis: 10.00 in. x 3.281 in. x 1.687 in.
LED status indicators
Slide switch allows selection of single or multiple switch modes.
Adjustable delay allows 0.5 to 10 seconds between steps.
Includes auxiliary 24VDC, 300mA (max) output for remote indicators
UL Listed power supply with input 100-240VAC, output 24VDC, 500mA, 6 ft. cord and four plug adaptors (NEMA 1-15, Schuko CEE 7/16, BS1362, AS3112)
COMPLIANCE & CERTIFICATION
Made in U.S.A. with global components
A&E SPECIFICATIONS
The device for sequentially activating equipment connected to remote power controls shall be Lowell Model No. SEQ-8, which shall feature barrier strip terminals for connection to remote power control Model No. RPC- ________. Contacts shall also be available for connecting remote switches (required) for activation. [ Applications with multiple switch actuation shall use momentary wall switch Model No. _____ or momentary rack panel switch Model No. ______. Applications with single switch actuation shall use maintained wall switch Model No. ___ or maintained rack panel switch Model No. _____. ]
