Low voltage, 4-step power sequencer works with an external trigger and remote power control or relay to provide time-delayed activation and deactivation of AC powered equipment on site or at remote locations. The SEQ-P4 can control up to 80 RPC-P Series remote power controls and/or RY-P Series relay modules. Alternatively, the SEQ-P4 can control a virtually unlimited number of RPC Series and/or RY Series (classic connection) devices by using the RY-P1 or RY-P2 relay modules as an interface.
FEATURES
Quick "pass-through" connections with RJ45 jacks.
Because the step assignment is actually selected on the connected devices (RPC-P Series remote power controls or RY-P Series relays), the startup sequence can be quickly changed without the need to re-wire.
Four delayed closure circuits activate in sequential order (1, 2, 3, 4) and deactivate in reverse order (4, 3, 2,1). Delay between steps is easily adjusted with DIP switches. Choose equal delays or varied delays with extended delay at startup.
Sequencing is initiated via an external trigger (SPST switch or DSP voltage connection). Order separately.
7"L chassis
LED status indicators
UL Listed power supply with input 100-240VAC, output 24VDC, 500mA, 6 ft. cord and several plug adaptors.
COMPLIANCE & CERTIFICATION
Made in U.S.A. with global components
A&E SPECIFICATIONS
The power sequencer shall be Lowell model #SEQ-P4, which shall feature four delayed closure circuits in RJ45 jacks to activate and deactivate connected devices in a predetermined order, providing adjustable time delays between steps. The 7” x 3.28” x 1.69” chassis shall be steel with black finish, mounting holes, and LED status indicators. The unit shall include a UL Listed power supply (100-240VAC input, 24VDC 500mA output) with 6 ft. cable. The sequencer shall require an external activation trigger (SPST switch or DSP connection, ordered separately). It shall be designed to work with Lowell remote power controls (RPC-P Series) and relays (#RY-P1, #RY-P2) which shall be ordered separately.
