Lowell SG-8

Product Description


SG-8: Square Speaker Grille


SG-8 square speaker grille with beveled edges is made for use with an 8 inch driver. This grille is steel with beveled edges and white finish.

SPECIFICATIONS Style: Screw-mount Material: Single piece 22-gauge steel with beveled edges, square perforation pattern Finish: White Size: 11.438 in. square Mounting Projection: 0.125 in. Mounting Provisions: 4 screws (white), 4 welded studs with hex nuts CERTIFICATION & COMPLIANCE Made in the U.S.A. Certified U.S. steel A&E SPECIFICATIONS The square speaker grille for the 8 inch speaker (or Unihorn Model LUH-15T) shall be Lowell Model SG-8. It shall be formed with 22-gauge steel, have beveled edges and a square punched center. The grille shall be 11.438 in. square with a mounting projection of 0.125”. It shall include a chipboard gasket and 8-32 x 3/4 in. welded studs with hex nuts to mount the specified 8 in. speaker. Grille shall also have four 0.218 in. holes on 9.062” centers to mount specified recessed or surface backbox. Grille shall be finished in white powder epoxy and shall include white screws for backbox installation.

SG-8 square speaker grille with beveled edges is made for use with an 8 inch driver. This grille is steel with beveled edges and white finish.

Style: Screw-mount
Material: Single piece 22-gauge steel with beveled edges, square perforation pattern
Finish: White
Size: 11.438 in. square
Mounting Projection: 0.125 in.
Mounting Provisions: 4 screws (white), 4 welded studs with hex nuts

The square speaker grille for the 8 inch speaker (or Unihorn Model LUH-15T) shall be Lowell Model SG-8. It shall be formed with 22-gauge steel, have beveled edges and a square punched center. The grille shall be 11.438 in. square with a mounting projection of 0.125”. It shall include a chipboard gasket and 8-32 x 3/4 in. welded studs with hex nuts to mount the specified 8 in. speaker. Grille shall also have four 0.218 in. holes on 9.062” centers to mount specified recessed or surface backbox. Grille shall be finished in white powder epoxy and shall include white screws for backbox installation.