24-bit resolution; 44.1, 48, 88.2, and 96 kHz sampling rate
Inputs and Outputs
1 microphone input with low-noise, high-headroom, Class A mic preamplifier and +48V phantom power
1 instrument input
2 balanced ¼-inch TRS main line-level outputs
Stereo headphone output with independent level control
Controls
Zero-latency monitoring via internal analog mixer (fixed 50/50 mix via Direct button)
Large main volume knob
Signal present and clipping LEDs
Integrated Software
Studio One® Artist DAW software (macOS®/Windows®) and 6+ GB of third-party resources
Transfer files wirelessly from Capture for iPad to Studio One
Compatible with almost all recording software for macOS, Windows, and iPadOS®
Studio Magic Software Suite included
Construction and Security
Kensington lock hole
Metal chassis
Computer system requirements:
Below are the minimum computer-system requirements for the AudioBox iOne and AudioBox iTwo:
macOS®
macOS® 10.13 or higher (64-bit only)
Intel® Core™ i3 or better (M1 native compatible)
Minimum 4 GB RAM / Recommended 8 GB or more
Windows®
Windows® 10 (64-bit only)
Intel® Core™ i3/AMD A10 processor or better
Minimum 4 GB RAM / Recommended 8 GB or more
Mac and Windows Systems
USB 2.0 port
Internet connection
Internal or external 7200 RPM storage drive highly recommended
30 GB hard disk space
Monitor with 1366x768 resolution
Apple iPad
iPad® Pro, iPad Air, iPad mini with Retina display, iPad (4th generation)
iOS® 9.0.3 or higher
The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio or MIDI signals. Monitor resolution for both PC and Macintosh should be no lower than 1024x768 pixels.
VST is a registered trademark of Steinberg Media Technologies GmbH
ASIO is a trademark and software of Steinberg Media Technologies GmbH
Technical Specifications
Mi?crophone Preamp
Type
XLR female, balanced
Frequency Response (±3.0 dB)
10 Hz to 40 kHz
Input Impedance (Balanced)
1,200?
THD+N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain)
< 0.008%
S/N Ratio (Unity Gain, Ref. = +4 dBu, 20 Hz to 22 kHz)
> 95 dB
Common Mode Rejection Ratio (1 kHz, 52 dB Gain)
> 65 dB
Gain Control Range (± 1 dB)
0 dB to 52 dB
Max Input Level (Unity Gain, 1 kHz @ 0.5% THD+N)
+10 dBu
Phantom Power (±2 VDC)
+48 VDC
Line Input
Type
—
Input Impedance
—
Instrument Input
Type
¼" TS female, unbalanced
Input Impedance
1 M?
Line Outputs
Type
¼" TRS female, balanced
Output Impedance
51?
Headphone Output
Type ¼" TRS active stereo
Maximum Output 60 mW/ch. @ 60? Load
Frequency Response (±1.0 dB) 20 Hz - 30 kHz
Output Impedance 10?
MIDI I/O
Type —
Digital Audio
ADC Dynamic Range (A-wtd, 48 kHz Sample Rate) 105 dB
DAC Dynamic Range (A-wtd, 48 kHz Sample Rate) 105 dB
Bit Depth 24
Reference Level for 0 dBFS +10 dBu
Internal Sample Frequency Selections (kHz) 44.1, 48, 88.2, 96
Power USB bus-powered
