CDL12P
The CDL that fits your venue AND your budget.
The CDL12 loudspeakers impressed ears around the world when we introduced them, thanks in no small part to their unique, patent-pending driver design that fills venues with consistent, articulate speech and music reproduction without sacrificing consistent SPL. Now that same constant-directivity performance is available in the new CDL12P, a lighter-weight design ideal for touring bands and mobile DJs who want the same scalability and sonic performance in portable design. |
Main Components
- Continuous-directivity constant curve array with eight 2-inch cone drivers disperse sound an amazing 120° horizontally
- 15? vertical directivity can be extended from 30? up to 90? with additional arrayable CDL12Ps
- 12-inch, long-throw LF transducer with 2.5-inch voice coil
- Low crossover point minimizes comb filtering and enhances line array intelligibility
- 500 x 500 watts Class D power for high SPLs and lightning-fast transient response
- Locking AC connector in and out
- Balanced XLR input and output
Controls
- 90 High-pass filter
- Array Mode (1-6 boxes)
- Sub Mode (Off, CDL18s, ULT18, or AIR18s)
Convenience Features
- 35 mm pole socket with 7.5? downward tilt for use with up to two CDL12P on a tripod or atop an 18-inch PreSonus® subwoofer (Note: a CDL18s must be used when two CDL12Ps are arrayed.)
- Integrated flyware to create an array of up to six CDL12Ps
- Signal, -3 dB, Limiter Protection, and Clip Monitoring?
- Easy-to-handle, compact form factor and 63 lb. weight
- Rugged plastic enclosure
- Tour-grade, 1.2 mm steel grille?
Accessories and companion products:
- CDL18s Subwoofer (Supports up to 2 CDL12Ps mounted atop)
- ULT18 Subwoofer (Supports 1 CDL12P atop)
- AIR18S Subwoofer (Support 1 CDL12P atop)
- CDL12P Rigging System Components
?
|
Technical Specifications
Acoustic Performance
Configuration Active 2-way
Frequency Response (-3 dB) 48 Hz – 18 kHz
Nominal Coverage (-6 dB) 120° (H) x 15° (V) per enclosure
Maximum Peak SPL 130 dB
Crossover Frequency 420 Hz
Transducer
LF Transducer 12” (2.5” voice coil)
HF Transducer 8 x 2” (1” Voice Coil)
Amplifier
Type Class D
Total Power Output 2,000W Peak, 1,000W Program (500W RMS)
LF Power 1,000W Peak, 500W Program (250W RMS)
HF Power 1,000W Peak, 500W Program (250W RMS)
Cooling Free air convection
Rated THD <0.05% (20 Hz - 20 kHz)
Dynamic Range 119 dB (A-weighted)
Bandwidth 20 Hz - 20 kHz
Mains Connection Locking AC In and Out
Connections and Controls
Input Channels 1 Line
Input Connector Types 1 XLR
Line Input Impedance 40 k?
Maximum Input +4 dBu
Output Connector Direct Line Out (XLR)
Controls
Preset Select (Number of Arrayed Boxes)
HPF On/Off
PreSonus Subwoofer Configuration Preset (None, CDL18s, ULT18, AIR18s)
Indicators Signal, -3 dB, Limiter, Clip
Enclosure
Material 15mm polypropylene
Grille Powder-coated steel
Dimensions (HxWxD) 18.5” x 20.5” x 18.25” (470 mm x 521 mm x 464 mm)
Unit Weight 63 lbs. (28.6 kg)
Safety
Amplifier Protection Over-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection Limiter
Power
AC Power Input 90-260V~, 50-60 Hz
AC Power Consumption (1/8 Power) 4.2 amps
Suspension Mounting
Rigging Points Integrated rigging (10:1 load)
Mounting Dual-position pole mount (0° and 7.5°) 35 mm
Optional Accessories
Rigging CDL12P Rigging Grid, CDL Rigging Extension Bar, CDL12P Rigging Sling
Other CDL12-Tote Tote Bag
As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification. |
