Home > Search By Brands > PreSonus > PreSonus Studio Monitors > PreSonus Temblor T10

PreSonus Temblor T10

PreSonus Temblor T10

Product Description


Temblor T10 A solid foundation for mixing. Powerful and musical, Temblor® T10 active, front-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.

Features Main components 10-inch, front-firing, glass-composite low-frequency transducer Front-firing, bass-reflex acoustic port Controls and filters Input gain control (-30 dB to +6 dB, continuously variable) Continuously variable lowpass filter (50 Hz to 130 Hz) Built-in crossover Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out Polarity invert Ground-lift switch Power and safety 250 watt, Class AB amplification Internal damping and heat sink Integrated rubber feet for stable placement Inputs and outputs Left and right, balanced XLR and Ľ” TRS and unbalanced RCA main inputs Left and right balanced XLR and Ľ” TRS outputs XLR subwoofer output for connecting a second Temblor® T10 Software Studio One® Prime and Studio Magic Software Suite ($1,000 value!)

Technical Specifications Inputs 2- Balanced XLR 2- Balanced Ľ” TRS 2- Unbalanced RCA Outputs 2- Balanced XLR (full range with 80 Hz HPF option) 2- Balanced Ľ” TRS (full range with 80 Hz HPF option) 1- Balanced XLR (Sub Out) Performance Frequency Response 20 Hz – 200 Hz Low Pass Filter Frequency 50 – 130 Hz (variable) Signal-to-Noise Ratio >98 dB (A weighted) THD 0.019% @ power <160W Amplifier Power 250W peak, 170W RMS Power Consumption 230W Amplifier Type Class AB Peak SPL at 1m 113 dB Woofer 10” glass-composite, front-firing Acoustic Port Front-firing bass reflex User Controls Input Gain Range -30 to +6 dB Polarity Switch 0° or 180° Low Pass Filter Control 50 Hz to 130 Hz Ground Lift Switch On/Off High Pass Filter Switch On/Off Bypass Footswitch On/Off Protection RF interference Output-current limiting Over-temperature Turn-on/off transient Subsonic filter External mains fuse Power 100-120V ~50/60 Hz or 220-240V ~50/60 Hz Cabinet Vinyl-laminated MDF Physical Width 12.6” (320 mm) Depth 15.75” (400 mm) Height 15.75” (400 mm) Weight 39.46 lbs (17.9 kg) As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without