SPECIFICATIONS
|
AD-C1200 |
| Configuration |
Passive |
| Low-frequency Transducer |
12-inch (304 mm) ferrite woofer |
| Hight-frequency Transducer |
1.75-inch (44 mm) neodymium compression driver |
Frequency Range 1
Frequency Response (-6 dB)
Useable Frequency Range (-10 dB) |
42 Hz to 18 kHz
37 Hz to 18 kHz |
Maximum Output 2
Calculated Peak Output
Calculated Continuous Output |
124 dB SPL
118 dB SPL |
| Nominal Coverage |
85° conical DMT |
| Nominal Impedance |
16 ohms |
Power Rating
Continuous power handling3
Recommended amplifier power (loudspeaker "program" power) |
300 W
600 W |
| Sensitivity |
93 dB SPL, 1W/1m |
| Bass Loading |
Ported |
| Transformer Type |
Custom low distortion laminated core, wide bandwidth design |
| Transformer Taps |
100 V: 16? bypass, 150 W, 75 W, 37.5 W
70 V: 16? bypass, 150 W, 75 W, 37.5 W, 18.2 W |
| Agency Rating |
CE, UL 1480 (commercial/professional use)
UL 2043 (air handling spaces) |
ENCLOSURE |
| Enclosure Volume |
AD-C1200BB: 88 L (3.1 ft 3) |
| Connectors |
Back box (AD-C1200BB): ceramic block connector inputs and “through” connectors (rated for 400 W max). Loudspeaker Baffle: Euro-style connectors. |
| Mounting Hardware |
Pre-installed, suspended, back box, four mounting tabs.
Loudspeaker Baffle: six mounting screws. |
| Weight - Net |
AD-C1200: 25 lb / 11.3 kg
AD-C1200BB: 53 lb / 24 kg
Complete Assembly: 78 lb / 35.3 kg |
| Dimensions (HWD) |
Complete Assembly: 23-inch x 18-inch x 15.5-inch (584 mm x 454 mm x 393 mm) |
1All frequency ranges specified refer to measured half-space response (2 pi).
2Calculated maximum peak SPL at 1 m, half-space, speaker operating at rated rms power pink noise input, 50 Hz to 20 kHz.
3Maximum input power tested in accordance with IEC recommendations; 50 Hz to 20 kHz band limiting, 6 dB signal crest factor.
Specifications are subject to change without notice. |
