| HF transducer |
1" silk dome tweeter / 1" voice coil, horn loaded |
| LF transducer |
6.5" weather treated paper cone woofer
1.5" / 38 mm voice coil |
| Effective frequency range1,2,3,8 |
58 Hz - 20k Hz |
| Rated noise power / voltage6 |
150 W / 49 V (rms) |
| Broadband sensitivity2,3,4,8 |
89 dB SPL |
| Coverage angle (-6 dB)2,5,8 |
105° conical DMT |
| Directivity factor (Q)2,5,8 |
5 |
| Directivity Index |
7 dB |
| Maximum continuous SPL7 |
110 dB |
| Maximum peak SPL7 |
116 dB |
| Rated impedance |
16 ? |
| Recommended amplifier power |
300 W |
| Input connector type |
Euroblock connector with parallel output |
| Enclosure material |
Painted ABS polymer |
| Grille material |
Powder coated aluminum |
| Enclosure Details |
| Ingress protection |
IP-54 |
| Operating environment |
Designed for indoor and outdoor use |
| Testing |
The AD-S6 Series loudspeakers qualified for outdoor use using the following tests:
- Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
- Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
- High and low temperature: tested to QSC internal standards between -20° and 50° C
|
| Operarating temperature range |
-20 to 50 °C / -4 to 122 °F |
| Net weight |
11.6 lb / 5.26 kg |
Product dimensions
(HWD) inches |
14.4 × 8.5 × 8.5 |
Product dimensions
(HWD) mm |
365 × 215 × 215 |
| Shipping weight |
28.7 lb / 13.02 kg (pair packed) |
Shipping dimensions
(HWD) inches |
20 × 12 × 23 (pair packed) |
Shipping dimensions
(HWD) mm |
510 × 305 × 585 (pair packed) |
| Included accessories |
Patented X-Mount™ mounting system, Euroblock connector,
input panel cover |
1 -10 dB from rated sensitivity
2 Full-space, 4 m
3 Reference axis
4 70-20 kHz average
5 1k-10 k Hz average
6 IEC, 2hrs, based on 16 ? nominal impedance
7 Calculated from rated noise power and sensitivity
8 Reference plane is the plane with the loudspeaker baffle plane. Reference axis is the axis perpendicularto the reference plane and passing through the center of the baffle. Vertical plane is the plane intersecting the reference plane at a right angle, including the reference axis. Horizontal plane is the plane intersecting the reference plane and the vertical plane at a right angle, including the reference axis. |
